Withdrawn Rationale:
This specification covers gypsum sheathing with a water-resistant core, which is designed to be used as a sheathing on buildings.
Formerly under the jurisdiction of Committee C11 on Gypsum and Related Building Materials and Systems, this specification was withdrawn in December 2004 and replaced by Specification C 1396/C 1396M for Gypsum Board.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards volume information, refer to the standard's Document Summary page on the ASTM website.
1. Scope
1.1 This specification covers gypsum sheathing with a water-resistant core, which is designed to be used as a sheathing on buildings.
Note 1—Specification C 1280 contains application procedures for gypsum sheathing board.
1.2 The values stated in either inch-pound or SI (metric) units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independently of the other. Values from the two systems shall not be combined.
Reproduced, with permission, from the ASTM International website, copyright ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428. To purchase the complete standard, go to http://www.astm.org/.
