Construction Products Meeting ASTM Standards

Performance specifications for products are frequently based on the ASTM standards used in building codes. BuildSite indexes products by these standards. Want to find a grout that meets ASTM C1107, wall insulation that meets ASTM C578, or an elastomeric sealant that meets ASTM C920? This is the place to start.

258 ASTM Standards 
Show filters
ASTM number
A36 (4)
Title
ASTM A36/A36M — Standard Specification for Carbon Structural Steel
ASTM number
A82 (31)
Title
ASTM A82/A82M — Standard Specification for Steel Wire Plain for Concrete Reinforcement
ASTM number
A123 (1)
Title
ASTM A123/A123M — Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
ASTM number
A153 (39)
Title
ASTM A153/A153M — Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM number
A167 (7)
Title
ASTM A167 — Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate Sheet and Strip
ASTM number
A185 (1)
Title
ASTM A185/A185M — Standard Specification for Steel Welded Wire Reinforcement Plain for Concrete
ASTM number
A193 (4)
Title
ASTM A193/A193M — Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for HighTemperature Service
ASTM number
A240 (1)
Title
ASTM A240/A240M — Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate Sheet and Strip for Pressure Vessels and for General Applications
ASTM number
A449 (1)
Title
ASTM A449 — Standard Specification for Quenched and Tempered Steel Bolts and Studs
ASTM number
A510 (3)
Title
ASTM A510/A510M — Standard Specification for General Requirements for Wire Rods and Coarse Round Wire Carbon Steel
ASTM number
A563 (3)
Title
ASTM A563 — Standard Specification for Carbon and Alloy Steel Nuts
ASTM number
A580 (18)
Title
ASTM A580/A580M — Standard Specification for Stainless Steel Wire
ASTM number
A603 (1)
Title
ASTM A603 — Standard Specification for Zinc-Coated Steel Structural Wire Rope
ASTM number
A615 (1)
Title
ASTM A615/A615M — Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
ASTM number
A633 (2)
Title
ASTM A633/A633M — Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM number
A641 (22)
Title
ASTM A641/A641M — Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
ASTM number
A645 (1)
Title
ASTM A645/A645M — Standard Specification for Pressure Vessel Plates Five Percent Nickel Alloy Steel Specially Heat Treated
ASTM number
A653 (131)
Title
ASTM A653/A653M — Standard Specification for Steel Sheet Zinc-Coated (Galvanized) or Zinc-Iron AlloyCoated (Galvannealed) by the Hot-Dip Process
ASTM number
A755 (48)
Title
ASTM A755/A755M — Standard Specification for Steel Sheet Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
ASTM number
A780 (2)
Title
ASTM A780 / A780M - 09 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM number
A792 (30)
Title
ASTM A792/A792M — Standard Specification for Steel Sheet 55 Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM number
A820 (5)
Title
ASTM A820/A820M — Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
ASTM number
A924 (25)
Title
ASTM A924/A924M — Standard Specification for General Requirements for Steel Sheet Metallic-Coated by the Hot-Dip Process
ASTM number
A951 (12)
Title
ASTM A951/A951M — Standard Specification for Steel Wire for Masonry Joint Reinforcement
ASTM number
A1003 (82)
Title
ASTM A1003/A1003M — Standard Specification for Steel Sheet Carbon Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM number
A1023 (1)
Title
ASTM A1023/A1023M — Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
ASTM number
B69 (8)
Title
ASTM B69 — Standard Specification for Rolled Zinc
ASTM number
B85 (1)
Title
ASTM B85/B85M — Standard Specification for Aluminum-Alloy Die Castings
ASTM number
B117 (1)
Title
ASTM B117 - 11 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM number
B209 (45)
Title
ASTM B209 — Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM number
B240 (1)
Title
ASTM B240 — Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM number
B370 (23)
Title
ASTM B370 — Standard Specification for Copper Sheet and Strip for Building Construction
ASTM number
B418 (1)
Title
ASTM B418 — Standard Specification for Cast and Wrought Galvanic Zinc Anodes
ASTM number
B633 (16)
Title
ASTM B633 — Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM number
B695 (11)
Title
ASTM B695 — Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM number
B928 (1)
Title
ASTM B928/B928M — Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service
ASTM number
C28 (7)
Title
ASTM C28/C28M — Standard Specification for Gypsum Plasters
ASTM number
C33 (8)
Title
ASTM C33/C33M — Standard Specification for Concrete Aggregates
ASTM number
C36 (2)
Title
ASTM C36/C36M -03e1 ASTM C36/C36M -03e1 Standard Specification for Gypsum Wallboard (Withdrawn 2005)
ASTM number
C39 (3)
Title
ASTM C39 / C39M - 14 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM number
C59 (2)
Title
ASTM C59/C59M — Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
ASTM number
C61 (1)
Title
ASTM C61/C61M — Standard Specification for Gypsum Keenes Cement
ASTM number
C78 (2)
Title
ASTM C78 / C78M - 10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM number
C79 (2)
Title
ASTM C79/C79M -04a ASTM C79/C79M -04a Standard Specification for Gypsum Sheathing Board (Withdrawn 2005)
ASTM number
C91 (3)
Title
ASTM C91/C91M — Standard Specification for Masonry Cement
ASTM number
C109 (16)
Title
ASTM C109 / C109M - 13 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM number
C135 (1)
Title
ASTM C135 - 96(2009)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM number
C136 (3)
Title
ASTM C136 - 06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM number
C144 (8)
Title
ASTM C144 — Standard Specification for Aggregate for Masonry Mortar
ASTM number
C150 (30)
Title
ASTM C150/C150M — Standard Specification for Portland Cement
ASTM number
C157 (1)
Title
ASTM C157 / C157M - 08 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
ASTM number
C171 (1)
Title
ASTM C171 — Standard Specification for Sheet Materials for Curing Concrete
ASTM number
C191 (1)
Title
ASTM C191 - 13 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM number
C206 (14)
Title
ASTM C206 — Standard Specification for Finishing Hydrated Lime
ASTM number
C207 (5)
Title
ASTM C207 — Standard Specification for Hydrated Lime for Masonry Purposes
ASTM number
C208 (4)
Title
ASTM C208 — Standard Specification for Cellulosic Fiber Insulating Board
ASTM number
C260 (21)
Title
ASTM C260/C260M — Standard Specification for Air-Entraining Admixtures for Concrete
ASTM number
C270 (5)
Title
ASTM C270 — Standard Specification for Mortar for Unit Masonry
ASTM number
C309 (114)
Title
ASTM C309 — Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
ASTM number
C356 (2)
Title
ASTM C356 - 10 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM number
C387 (13)
Title
ASTM C387/C387M — Standard Specification for Packaged Dry Combined Materials for Mortar and Concrete
ASTM number
C473 (1)
Title
ASTM C473 - 12 Standard Test Methods for Physical Testing of Gypsum Panel Products
ASTM number
C475 (42)
Title
ASTM C475/C475M — Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
ASTM number
C476 (3)
Title
ASTM C476 — Standard Specification for Grout for Masonry
ASTM number
C494 (136)
Title
ASTM C494/C494M — Standard Specification for Chemical Admixtures for Concrete
ASTM number
C509 (1)
Title
ASTM C509 — Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
ASTM number
C514 (3)
Title
ASTM C514 — Standard Specification for Nails for the Application of Gypsum Board
ASTM number
C516 (1)
Title
ASTM C516 — Standard Specification for Vermiculite Loose Fill Thermal Insulation
ASTM number
C547 (5)
Title
ASTM C547 — Standard Specification for Mineral Fiber Pipe Insulation
ASTM number
C549 (1)
Title
ASTM C549 — Standard Specification for Perlite Loose Fill Insulation
ASTM number
C553 (22)
Title
ASTM C553 — Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
ASTM number
C557 (16)
Title
ASTM C557 — Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM number
C578 (47)
Title
ASTM C578 — Standard Specification for Rigid Cellular Polystyrene Thermal Insulation
ASTM number
C587 (9)
Title
ASTM C587 — Standard Specification for Gypsum Veneer Plaster
ASTM number
C592 (1)
Title
ASTM C592 — Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
ASTM number
C612 (61)
Title
ASTM C612 — Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM number
C618 (1)
Title
ASTM C618 — Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete
ASTM number
C631 (3)
Title
ASTM C631 — Standard Specification for Bonding Compounds for Interior Gypsum Plastering
ASTM number
C635 (22)
Title
ASTM C635/C635M — Standard Specification for the Manufacture Performance and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
ASTM number
C636 (3)
Title
ASTM C636 / C636M - 13 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
ASTM number
C642 (3)
Title
ASTM C642 - 13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
ASTM number
C645 (46)
Title
ASTM C645 — Standard Specification for Nonstructural Steel Framing Members
ASTM number
C653 (2)
Title
ASTM C653 - 97(2012) Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
ASTM number
C665 (48)
Title
ASTM C665 — Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
ASTM number
C666 (3)
Title
ASTM C666 / C666M - 03(2008) Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
ASTM number
C672 (6)
Title
ASTM C672 / C672M - 12 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
ASTM number
C722 (4)
Title
ASTM C722 — Standard Specification for Chemical-Resistant Resin Monolithic Surfacings (Withdrawn 2003)
ASTM number
C726 (2)
Title
ASTM C726 — Standard Specification for Mineral Fiber Roof Insulation Board
ASTM number
C728 (7)
Title
ASTM C728 — Standard Specification for Perlite Thermal Insulation Board
ASTM number
C754 (20)
Title
ASTM C754 — Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
ASTM number
C764 (5)
Title
ASTM C764 — Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
ASTM number
C795 (19)
Title
ASTM C795 — Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM number
C827 (6)
Title
ASTM C827 / C827M - 10 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM number
C834 (13)
Title
ASTM C834 — Standard Specification for Latex Sealants
ASTM number
C836 (15)
Title
ASTM C836/C836M — Standard Specification for High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
ASTM number
C837 (1)
Title
ASTM C837 - 09 Standard Test Method for Methylene Blue Index of Clay
ASTM number
C840 (60)
Title
ASTM C840 — Standard Specification for Application and Finishing of Gypsum Board
ASTM number
C841 (16)
Title
ASTM C841 — Standard Specification for Installation of Interior Lathing and Furring
ASTM number
C842 (4)
Title
ASTM C842 — Standard Specification for Application of Interior Gypsum Plaster
ASTM number
C843 (5)
Title
ASTM C843 — Standard Specification for Application of Gypsum Veneer Plaster
ASTM number
C844 (6)
Title
ASTM C844 — Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
ASTM number
C845 (3)
Title
ASTM C845/C845M — Standard Specification for Expansive Hydraulic Cement
ASTM number
C847 (9)
Title
ASTM C847 — Standard Specification for Metal Lath
ASTM number
C881 (87)
Title
ASTM C881/C881M — Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
ASTM number
C882 (9)
Title
ASTM C882 / C882M - 13a Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM number
C884 (1)
Title
ASTM C884 / C884M - 98(2010) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
ASTM number
C897 (3)
Title
ASTM C897 — Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
ASTM number
C919 (2)
Title
ASTM C919 - 12 Standard Practice for Use of Sealants in Acoustical Applications
ASTM number
C920 (91)
Title
ASTM C920 — Standard Specification for Elastomeric Joint Sealants
ASTM number
C923 (1)
Title
ASTM C923 — Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures Pipes and Laterals
ASTM number
C926 (12)
Title
ASTM C926 — Standard Specification for Application of Portland Cement-Based Plaster
ASTM number
C928 (35)
Title
ASTM C928/C928M — Standard Specification for Packaged Dry Rapid-Hardening Cementitious Materials for Concrete Repairs
ASTM number
C932 (5)
Title
ASTM C932 — Standard Specification for Surface-Applied Bonding Agents for Exterior Plastering
ASTM number
C937 (1)
Title
ASTM C937 — Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
ASTM number
C942 (1)
Title
ASTM C942 - 10 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM number
C954 (6)
Title
ASTM C954 — Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
ASTM number
C955 (34)
Title
ASTM C955 — Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
ASTM number
C957 (3)
Title
ASTM C957/C957M — Standard Specification for High-Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM number
C979 (7)
Title
ASTM C979/C979M — Standard Specification for Pigments for Integrally Colored Concrete
ASTM number
C991 (2)
Title
ASTM C991 — Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
ASTM number
C1002 (12)
Title
ASTM C1002 — Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
ASTM number
C1007 (1)
Title
ASTM C1007 — Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
ASTM number
C1017 (10)
Title
ASTM C1017/C1017M — Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
ASTM number
C1047 (140)
Title
ASTM C1047 — Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
ASTM number
C1059 (18)
Title
ASTM C1059/C1059M — Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
ASTM number
C1063 (16)
Title
ASTM C1063 — Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
ASTM number
C1071 (9)
Title
ASTM C1071 — Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
ASTM number
C1104 (4)
Title
ASTM C1104 / C1104M - 13a Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM number
C1105 (1)
Title
ASTM C1105 - 08a Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
ASTM number
C1107 (41)
Title
ASTM C1107/C1107M — Standard Specification for Packaged Dry Hydraulic-Cement Grout (Nonshrink)
ASTM number
C1116 (30)
Title
ASTM C1116/C1116M — Standard Specification for Fiber-Reinforced Concrete
ASTM number
C1136 (12)
Title
ASTM C1136 — Standard Specification for Flexible Low Permeance Vapor Retarders for Thermal Insulation
ASTM number
C1141 (3)
Title
ASTM C1141/C1141M — Standard Specification for Admixtures for Shotcrete
ASTM number
C1177 (19)
Title
ASTM C1177/C1177M — Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
ASTM number
C1178 (4)
Title
ASTM C1178/C1178M — Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel
ASTM number
C1184 (3)
Title
ASTM C1184 — Standard Specification for Structural Silicone Sealants
ASTM number
C1186 (1)
Title
ASTM C1186 — Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
ASTM number
C1197 (1)
Title
ASTM C1197 - 09 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
ASTM number
C1240 (3)
Title
ASTM C1240 — Standard Specification for Use of Silica Fume for Use as a Mineral Admixture in HydraulicCement Concrete Mortar and Grout
ASTM number
C1278 (7)
Title
ASTM C1278/C1278M — Standard Specification for Fiber-Reinforced Gypsum Panel
ASTM number
C1280 (1)
Title
ASTM C1280 — Standard Specification for Application of Gypsum Sheathing
ASTM number
C1288 (1)
Title
ASTM C1288 — Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
ASTM number
C1289 (50)
Title
ASTM C1289 — Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
ASTM number
C1290 (2)
Title
ASTM C1290 — Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
ASTM number
C1315 (57)
Title
ASTM C1315 — Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
ASTM number
C1325 (8)
Title
ASTM C1325 — Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Interior Substrate Sheets
ASTM number
C1328 (3)
Title
ASTM C1328/C1328M — Standard Specification for Plastic (Stucco) Cement
ASTM number
C1329 (1)
Title
ASTM C1329/C1329M — Standard Specification for Mortar Cement
ASTM number
C1330 (1)
Title
ASTM C1330 — Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
ASTM number
C1384 (4)
Title
ASTM C1384 — Standard Specification for Admixtures for Masonry Mortars
ASTM number
C1393 (4)
Title
ASTM C1393 — Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
ASTM number
C1396 (72)
Title
ASTM C1396/C1396M — Standard Specification for Gypsum Board
ASTM number
C1438 (1)
Title
ASTM C1438 - 13 Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
ASTM number
C1480 (2)
Title
ASTM C1480/C1480M — Standard Specification for Packaged Pre-Blended Dry Combined Materials for Use in Wet or Dry Shotcrete Application
ASTM number
C1513 (20)
Title
ASTM C1513 — Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
ASTM number
C1549 (3)
Title
ASTM C1549 - 09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM number
C1582 (1)
Title
ASTM C1582/C1582M — Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
ASTM number
C1600 (2)
Title
ASTM C1600/C1600M — Standard Specification for Rapid Hardening Hydraulic Cement
ASTM number
C1629 (2)
Title
ASTM C1629 / C1629M - 06(2011) Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
ASTM number
C1658 (10)
Title
ASTM C1658/C1658M — Standard Specification for Glass Mat Gypsum Panels
ASTM number
C1766 (1)
Title
ASTM C1766 — Standard Specification for Factory-Laminated Gypsum Panel Products
ASTM number
D41 (7)
Title
ASTM D41/D41M — Standard Specification for Asphalt Primer Used in Roofing Dampproofing and Waterproofing
ASTM number
D146 (1)
Title
ASTM D146 / D146M - 04(2012)e1 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM number
D226 (14)
Title
ASTM D226/D226M — Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
ASTM number
D235 (1)
Title
ASTM D235 - 02(2012) Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
ASTM number
D260 (1)
Title
ASTM D260 -86(2001) ASTM D260 -86(2001) Standard Specification for Boiled Linseed Oil (Withdrawn 2007)
ASTM number
D312 (5)
Title
ASTM D312/D312M — Standard Specification for Asphalt Used in Roofing
ASTM number
D448 (1)
Title
ASTM D448 - 12 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM number
D449 (1)
Title
ASTM D449/D449M — Standard Specification for Asphalt Used in Dampproofing and Waterproofing
ASTM number
D638 (13)
Title
ASTM D638 - 10 Standard Test Method for Tensile Properties of Plastics
ASTM number
D962 (1)
Title
ASTM D962 - 81(2008)e1 Standard Specification for Aluminum Powder and Paste Pigments for Paints
ASTM number
D1056 (3)
Title
ASTM D1056 — Standard Specification for Flexible Cellular Materials-Sponge or Expanded Rubber
ASTM number
D1187 (12)
Title
ASTM D1187/D1187M — Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
ASTM number
D1227 (15)
Title
ASTM D1227/D1227M — Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
ASTM number
D1653 (3)
Title
ASTM D1653 - 13 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM number
D1668 (1)
Title
ASTM D1668/D1668M — Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
ASTM number
D1751 (3)
Title
ASTM D1751 — Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
ASTM number
D1752 (8)
Title
ASTM D1752 — Standard Specification for Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM number
D1784 (1)
Title
ASTM D1784 — Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM number
D1970 (28)
Title
ASTM D1970/D1970M — Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
ASTM number
D2000 (1)
Title
ASTM D2000 - 12 Standard Classification System for Rubber Products in Automotive Applications
ASTM number
D2028 (1)
Title
ASTM D2028/D2028M — Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM number
D2103 (1)
Title
ASTM D2103 — Standard Specification for Polyethylene Film and Sheeting
ASTM number
D2178 (16)
Title
ASTM D2178/D2178M — Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
ASTM number
D2240 (12)
Title
ASTM D2240 - 05(2010) Standard Test Method for Rubber Property—Durometer Hardness
ASTM number
D2556 (2)
Title
ASTM D2556 - 14 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
ASTM number
D2822 (1)
Title
ASTM D2822/D2822M — Standard Specification for Asphalt Roof Cement Asbestos Containing (Withdrawn 2016)
ASTM number
D2824 (12)
Title
ASTM D2824/D2824M — Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings Nonfibered Asbestos Fibered and Fibered without Asbestos
ASTM number
D3018 (51)
Title
ASTM D3018/D3018M — Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
ASTM number
D3019 (13)
Title
ASTM D3019/D3019M — Standard Specification for Lap Cement Used with Asphalt Roll Roofing Non-Fibered and Fibered
ASTM number
D3161 (3)
Title
ASTM D3161 / D3161M - 13 Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
ASTM number
D3273 (12)
Title
ASTM D3273 - 12 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM number
D3409 (6)
Title
ASTM D3409 - 93(2008) Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
ASTM number
D3462 (56)
Title
ASTM D3462/D3462M — Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
ASTM number
D3498 (6)
Title
ASTM D3498 — Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
ASTM number
D3575 (2)
Title
ASTM D3575 - 14 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
ASTM number
D3679 (7)
Title
ASTM D3679 — Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM number
D3699 (1)
Title
ASTM D3699 — Standard Specification for Kerosine
ASTM number
D3754 (2)
Title
ASTM D3754 — Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM number
D3805 (3)
Title
ASTM D3805 / D3805M - 97(2009) Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
ASTM number
D3909 (14)
Title
ASTM D3909/D3909M — Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
ASTM number
D3960 (1)
Title
ASTM D3960 - 05(2013) Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM number
D3963 (1)
Title
ASTM D3963/D3963M — Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
ASTM number
D4014 (1)
Title
ASTM D4014 - 03(2012) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM number
D4434 (6)
Title
ASTM D4434/D4434M — Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
ASTM number
D4477 (3)
Title
ASTM D4477 — Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
ASTM number
D4479 (7)
Title
ASTM D4479/D4479M — Standard Specification for Asphalt Roof Coatings Asbestos-Free
ASTM number
D4541 (1)
Title
ASTM D4541: Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM number
D4586 (23)
Title
ASTM D4586/D4586M — Standard Specification for Asphalt Roof Cement Asbestos-Free
ASTM number
D4601 (16)
Title
ASTM D4601/D4601M — Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
ASTM number
D4637 (5)
Title
ASTM D4637/D4637M — Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
ASTM number
D4819 (1)
Title
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM number
D4856 (1)
Title
ASTM D4856 - 11 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM number
D4869 (15)
Title
ASTM D4869/D4869M — Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
ASTM number
D4897 (8)
Title
ASTM D4897/D4897M — Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
ASTM number
D5078 (1)
Title
ASTM D5078 / D5078M - 11 Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
ASTM number
D5147 (8)
Title
ASTM D5147 / D5147M - 14 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
ASTM number
D5249 (3)
Title
ASTM D5249 — Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
ASTM number
D5893 (2)
Title
ASTM D5893/D5893M — Standard Specification for Cold Applied Single Component Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM number
D6083 (15)
Title
ASTM D6083/D6083M — Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
ASTM number
D6152 (1)
Title
ASTM D6152/D6152M — Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
ASTM number
D6153 (1)
Title
ASTM D6153 - 97(2007) Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
ASTM number
D6162 (7)
Title
ASTM D6162/D6162M — Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM number
D6163 (19)
Title
ASTM D6163/D6163M — Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM number
D6164 (37)
Title
ASTM D6164/D6164M — Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM number
D6221 (1)
Title
ASTM D6221/D6221M — Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
ASTM number
D6222 (19)
Title
ASTM D6222/D6222M — Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM number
D6223 (2)
Title
ASTM D6223/D6223M — Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM number
D6298 (4)
Title
ASTM D6298/D6298M — Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
ASTM number
D6509 (1)
Title
ASTM D6509/D6509M — Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
ASTM number
D6511 (2)
Title
ASTM D6511 / D6511M - 06(2011)e1 Standard Test Methods for Solvent Bearing Bituminous Compounds
ASTM number
D6560 (1)
Title
ASTM D6560 - 12 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM number
D6690 (5)
Title
ASTM D6690 — Standard Specification for Joint and Crack Sealants Hot Applied for Concrete and Asphalt Pavements
ASTM number
D6694 (2)
Title
ASTM D6694/D6694M — Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
ASTM number
D6757 (1)
Title
ASTM D6757/D6757M — Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
ASTM number
D6878 (6)
Title
ASTM D6878/D6878M — Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
ASTM number
E72 (1)
Title
ASTM E72 - 13a Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM number
E84 (33)
Title
ASTM E84 - 13a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM number
E90 (4)
Title
ASTM E90 - 09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM number
E96 (27)
Title
ASTM E96 / E96M - 13 Standard Test Methods for Water Vapor Transmission of Materials
ASTM number
E108 (7)
Title
ASTM E108 - 11 Standard Test Methods for Fire Tests of Roof Coverings
ASTM number
E119 (3)
Title
ASTM E119 - 12a Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM number
E136 (9)
Title
ASTM E136 - 12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
ASTM number
E408 (1)
Title
ASTM E408 - 13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM number
E488 (1)
Title
ASTM E488 / E488M - 10 Standard Test Methods for Strength of Anchors in Concrete Elements
ASTM number
E514 (1)
Title
ASTM E514 / E514M - 14 Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM number
E756 (1)
Title
ASTM E756 - 05(2010) Standard Test Method for Measuring Vibration-Damping Properties of Materials
ASTM number
E814 (1)
Title
ASTM E814 - 13a Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM number
E1264 (93)
Title
ASTM E1264 - 08e1 Standard Classification for Acoustical Ceiling Products
ASTM number
E1677 (5)
Title
ASTM E1677 — Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
ASTM number
E1745 (9)
Title
ASTM E1745 — Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
ASTM number
E1993 (1)
Title
ASTM E1993/E1993M — Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
ASTM number
E2357 (7)
Title
ASTM E2357 - 11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
ASTM number
F593 (2)
Title
ASTM F593 — Standard Specification for Stainless Steel Bolts Hex Cap Screws and Studs
ASTM number
F844 (3)
Title
ASTM F844 — Standard Specification for Washers Steel Plain (Flat) Unhardened for General Use
ASTM number
F1554 (1)
Title
ASTM F1554 — Standard Specification for Anchor Bolts Steel 36 55 and 105-ksi Yield Strength
ASTM number
F1667 (2)
Title
ASTM F1667 - 05 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM number
F1941 (1)
Title
ASTM F1941/F1941M — Standard Specification for Electrodeposited Coatings on Mechanical Fasteners Inch and Metric
Your Document Package
open
BuildSite

Copyright 2000–2023
BuildSite LLC.
All Rights Reserved.

Manufacturers
Distributors
Resources
Support
About Us